Advertisement
Chapter 2 Basic Operations
Loading the Media upon Releasing the Push Rollers
1.
Raise the media set levers and release the push rollers.
2.
3.
the push rollers.
Pass the sheet media under the push roller positioning guide and load it so that it is parallel with the front
guide.
Push Roller
Front Guide
4.
Align the left edge of the sheet media with the " I " marking of the "
Front Guide
5.
6.
edge of the media are scanned and the sheet media is loaded.
screen instructions.
CAUTION
When the "SHEET" is touched, the media and tool carriage will
start moving. Be careful to avoid contact with your body or any
object.
2-8
Cutting Mat
Edge of Sheet Media
Sheet Media
Set to be parallel
Sheet Media / Carrier Sheet Marking
" mark.
Edge of Sheet Media
Cutting Mat
Push Roller
Sheet Media
Sheet Media
Push Roller
" mark on the front guide.
Advertisement
