Advertisement
5.
Evenly position the edge of the sheet media up against the push rollers. Pass the sheet media under the
push roller positioning guide and load it so that it is parallel with the front guide.
Push Roller
Front Guide
Set to be parallel
6.
Align the left edge of the sheet media with the " I " marking of the "
Front Guide
7.
CAUTION
When the "SHEET" is touched, the media and tool carriage will start moving. Be careful to avoid contact
with your body or any object.
Edge of Sheet Media
Edge of Sheet Media
Push Roller
Sheet Media
Sheet Media / Carrier Sheet Marking
Push Roller
Sheet Media
" mark on the front guide.
Sheet Media
Chapter 2 Basic Operations
2-7
Advertisement
