Advertisement
Chapter 6 Troubleshooting
6.1
Responding to Trouble
When the device does not operate even when the power is turned ON
Symptom
There is nothing displayed on the
Operation is Irregular
Symptom
The device could not recognize
the media.
The media swerves.
stay on top of the media.
6-2
Possible Cause
Possible Cause
the intense light.
detection sensor.
The push rollers are not set properly.
The front side or the rear side of the
media is not cut straight in relation to the
media.
Solution
plugged in to the connector on the device
coming to the AC outlet.
Contact your sales representative or
Solution
away from the device.
Contact your sales representative or
Cut the edge of the media straight.
www.delinit.by
Advertisement
