Advertisement
Chapter 2 Basic Operations
2.1
Setting the Tool
Adjusting the Blade Depth of the Cutter
CAUTION
Be careful when handling the cutter blade to avoid cutting your hands, etc.
An excessive blade depth will damage the cutter blade and cutting mat or lead to wasteful consumption of
media. Keep the blade depth less than the thickness of the media.
CAUTION
Do not turn the cap clockwise (towards 10) from the state where the blade tip is not
protruding (at 0). Similarly, do not turn the cap further counter-clockwise (towards 0)
past the state where the blade tip is protruding by 1 mm (at 10). Doing either of these
may damage the cutter pen.
Reference and Precautions regarding Blade Depth Adjustment
Good
Vinyl Sheet
Backing
perform cut tests every time the type of media is switched.
2-2
Cutter Blade
No Good
Cutter Blade
Vinyl Sheet
Backing
Advertisement
