5.4
Cutting Thick Media
What is the Tangential Mode?
The tangential mode is a function used to cleanly cut the corners when working with thick media.
traveling even when cutting curves and corners.
Setting the Tangential Mode
The tangential mode consists of two modes.
Mode 1:
Mode 2:
1.
Touch the
setting screen.
2.
using the " " and " " and touch the
3.
Tool Down
Overcut (Start)
(1) Tool traveling direction
Original Cutting Line
Chapter 5 Detailed Settings
(2) Tool movement
Tool Up
Overcut (End)
(3) Tool traveling
direction
5-9