The Status Light; Loading Paper; Status Tag - Microcom 410 ECA Operator's Manual

Chapter 2
Operation
))))))))))))))))))))))))))))))))))))))))))))
2.3

THE STATUS LIGHT

Color
Green
Red
Flashing
Red
Flashing
Yellow
2.4

LOADING PAPER

The
following
section
explains
the
dispensing
mode.
Refer to
figures 1, 2
and 4 for
the printer
component
s.
))))))))))))))))))))))))))))))))))))))))))))
410 ECA Operators Manual
Status Light
Mode
All On-Line and ready to print
All Printer error:
Caused by a paper-out condition or a hardware failure. If
paper is out, follow instructions in section 2.3, otherwise turn
printer off and back on. If condition persists, contact your
service representative.
All Spike or low voltage on the AC line. The unit will remain in
this mode until the condition is removed and the printer is
powered off.
All Printer is paused or in standby mode and is waiting for the
front panel button to be pressed. If the paper was just
changed and the reprinted tag looks good, press the button
during the next print cycle to clear the repeat function and
flashing yellow light.
Meaning
Table 1
Basic
9