Microcom 410 ECA Operator's Manual page 26

Designing Labels Using LDS
Chapter 4
))))))))))))))))))))))))))))))))))))))))))))
text string is ignored. If the text string has less than the number of characters specified by
this parameter, then only those characters defined by the text string are printed. For
example, the text string - MICROCOM - would be 8 characters long.
TCI TEXT CONVERSION IDENTIFIER
The selected text string will be printed according to this chart. The values below define
which method is used:
1
2
3
7
12
13
14
15
16
20
21
24
25
26
*28
*29
*32
*33
40
42
43
44
* Refer to section 7.1.1 on how to use these TCI's
Example: For the text string - 1234567
A TCI of one would print it as an ASCII string
A TCI of 42 would print it as a Codabar barcode
))))))))))))))))))))))))))))))))))))))))))))
20
Text
Text Surrounded by Asterisks (Code 3 of 9)
Text with UPC-A/UPC-E Checksum Digit Printed
Logos (ROM and RAM)
UPC-A Barcode
UPC-E Barcode (SEND 11 DIGITS)
UPC-E Barcode (SEND 7 DIGITS)
Interleaved 2 of 5 Barcode
Code 3 of 9 Barcode
EAN-13 Barcode
EAN-8 Barcode
MSI 1 (Plessey)
MSI 2 (Plessey)
MSI 3 (Plessey)
Text with MSI Checksum Added - Type 1
Text with MSI Checksum Added - Type 2
Text with UPC-A Checksum and Extended Bars Added
Text with UPC-A With Extended Bars Added
Code 128 barcode
Codabar barcode
Code 93 barcode
AS-10 barcode
410 ECA Operators Manual