Microcom 410 ECA Operator's Manual page 78

Printer Commands
))))))))))))))))))))))))))))))))))))))))))))
0 Disable 1 & 2.
1 Enable auto-print mode
2 Clear all previous text upon receiving new data.
3 Enable 1 & 2.
XX 64 Auto Print String Count: ^A tells the printer how many text strings to accept
before printing. Section 5.3.
66 66 Initialize Storage Area for Saved Format Files: Used when format files are to
be stored into Ram. Section 5.3.8.
67 Load Logo: See chapter 6.
0 Send single logo in four rotations.
1 Send logo #1 of 2 in 2 rotations.
2 Send logo #2 of 2 in 2 rotations.
70 Clear commands 71-76.
71 Disable Copies Function.
72 Enable Copies Function.
XX 73 Load copies count: Tells the printer to print a group of tags. Will not increment
serial numbers (use ^D75).
1 74 Infinity Print: Prints a batch of tags like ^D75 but will continue to print until the
machine is turned off.
XX 75 Load Tag Count: Tells the printer to print a batch of tags using the serial number
function if enabled.
XX 76 Load Delay Time Between Tags: Preceded by ^A which contains the wait in
1/10ths of a second. Maximum value is 650.
80 Clears Commands 86, 88, 89.
81 Disable Serial Number Function: Will disable either single or multiple serial
number commands.
XX 84 Load Text String Number to increment/decrement: Tells the printer which text
string number to increment or decrement. For single serial numbers. Section 5.3.8.
XX 85 Load increment/decrement step value: This is the value that the single serial
number is incremented or decremented.
86 Single Serial Number Status:
0 Disable increment and decrement.
1 Enable increment. The serial number will be incremented by the value from ^D85.
2 Enable Decrement. The serial number will be decremented by the value from
^D85.
XX 87 Load Field Number to Clear Increment/Decrement
status: Clear the status of one or more serial numbers with this command.
XX 88 Load Field Number to Increment by 1: For multiple serial numbers.
XX 89 Load Field Number to Decrement by 1: For multiple serial numbers.
93 Load Control Code Recognition Status:
0 Enable control code recognition.
))))))))))))))))))))))))))))))))))))))))))))
72
Chapter 5
410 ECA Operators Manual