Fuselage; Battery Location For Evf - BVM PNP F-86 Construction And Operating Manual

FUSELAGE

COOLING OPTION FOR EVF
This step is optional, but we found it
reduced the temperature of the battery
packs on warmer days. You can make the
cut out using a BVM 1/16 Carbide Cutter.
After you make the cut out, you can use
testor's flat black on the inside to clean up
the flange.
CANOPY COOLING OPTION
There is a "molded- in' detail on the back of
the canopy that can be cut out for battery
cooling air exit.

BATTERY LOCATION FOR EVF

A strip of Velcro on the side of the fuse and the top of the battery rail is all that is
required. Apply a C.A. or epoxy finish to the tops of the wood rails to improve Velcro
adhesion.
BVM®2017 8 11/07/2017