Selecting Units For Consumption, Flow, Temperature And Pressure - Beko METPOINT FLM SF53 Installation And Operating Manual

Installation and operating manual
6.3.3. Selecting units for consumption, flow, temperature and pressure
Setup → Sensor Setup → Units
Press the >>UP<< button to select the desired unit and confirm by pressing the >>ENTER<< button 2x.
30
To make changes to the unit (for example), press the >>UP<<
button to select the "Unit" field and confirm by pressing the
>>ENTER<< button.
If there are too many units to fit on one screen, you can use the
"<<" button to access the next screen.
EN
METPOINT SF53
®