Entering Reference Conditions - Beko METPOINT FLM SF53 Installation And Operating Manual

EN

6.3.4. Entering reference conditions

Setup → Sensor Setup → Ext. Setup
Filtertime
Setup → Sensor Setup → Ext. Setup → Ref.Pres
Setup → Sensor Setup → Ext. Setup → Ref.Temp
Setup → Sensor Setup → Ext. Setup → Filtertime
METPOINT SF53
®
Enter the reference parameter values.
To make changes to the reference conditions, press the >>UP<<
button to select the "Unit" field and confirm by pressing the
>>ENTER<< button.
Press the >>UP<< button to select the unit to use and then
confirm by pressing the >>ENTER<< button twice.
Enter the reference temperature.
Under "Filtertime", you can enter an attenuation, provided that
a "Filtergrade" is entered.
Possible values: 0 -10000 in [ms].
Installation and operating manual
31