Control And Display Elements; Model With Display; Model With Led - Beko METPOINT FLM SF53 Installation And Operating Manual

EN

2.4. Control and display elements

2.4.1. Model with display

METPOIN T
FLOW MEASURING
395,38
160515
AIR
HW:1.00 SW:1.00
NOTE Additional information
For more information about operation, see "Configuration and operation" on Page 27.

2.4.2. Model with LED

METPOINT
®
A calibration reminder LED is mounted on the top of the housing of the METPOINT
recalibration becomes due and is indicated by the LED flashing. The flashing LED has no effect on measurement data. The
measurement signal is output as before.
The reminder time interval can be adjusted to customer requirements at the manufacturer's works.
METPOINT SF53
®
F LM
®
m /h
3
m 3
FLM
Installation and operating manual
Plug-type connector A
Plug-type connector B
FLM. After 15 months have elapsed,
®
11