Beko METPOINT FLM SF53 Installation And Operating Manual page 42

Installation and operating manual
BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss, GERMANY
Phone: +49 2131 988-0
www.beko-technologies.com
We hereby declare that the products named below comply with the stipulations of the relevant directives and
technical standards. This declaration only refers to products in the condition in which they have been placed
into circulation. Parts which have not been installed by the manufacturer and/or modifications which have
been implemented subsequently remain unconsidered.
Product designation:
Types:
Power supply:
IP protection rating
Max. operating pressure:
Min./max. operating temperature:
Data sheet:
Product description and function:
Pressure Equipment Directive 2014/68/EU
The products are not classified in any pressure equipment category. In accordance to article 4, section 3,
they have been designed and manufactured according to sound engineering practice as applicable in the EU
member states.
EMC Directive 2014/30/EU
Applied harmonized standards:
RoHS II Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction
of the use of certain hazardous substances in electrical and electronic devices.
The products bear the CE Mark:
This Declaration of Conformity has been issued by the manufacturer.
Neuss, 25/10/2016
CE_FLM-896-0916-FP-A
42
EU Declaration of Conformity
METPOINT ® FLM
SF53 and SF13
...
18 36 VDC
IP65
16 bar(g)
-30°C / +80°C
DB_FLM-0916-FP-A
Thermal flow meter for compressed air
EN 61326-1:2013, EN 61326-2-3:2013
Signed on behalf of:
BEKO TECHNOLOGIES GMBH
ppa Christian Riedel
Head of International Quality Management
EN
METPOINT SF53
®