Special Advice In Accordance With The 97/23/Ec Pressure Equipment Directive; Special Safety Instructions - Beko METPOINT OCV Installation And Operation Manual

4.2

Special advice in accordance with the 97/23/EC Pressure Equipment Directive

The proper use of the compressed-air plant is the basic requirement for safe operation. Therefore, the user must
proceed as follows:
• The measuring device must only be employed within the pressure and temperature range limits indicated by
the manufacturer on the type plate.
• The maximum operating pressure indicated by the manufacturer on the type plate must not be exceeded. It is
the user's task to install the appropriate safety and control devices.
• The METPOINT
inflammable substances.
• To avoid fractures resulting from material fatigue, the METPOINT
during operation.
• The documents related to the METPOINT
declaration etc.) must be kept safe for future reference.
• No objects whatsoever must be installed at or placed on the METPOINT
WARNING!
Unauthorised intervention!
Unauthorised interventions may endanger persons or plants and lead to malfunction.
Tampering, modification and abuse of the pressure devices is forbidden. Users of the devices need to
observe the local and national pressure equipment regulations in the country of installation.
4.3

Special safety instructions

IMPORTANT!
Overpressure!
Exceeding the maximum pressure can lead to damage in the plant.
Observe the type plate indications regarding the maximum pressure!
IMPORTANT!
Exceeding of the measuring range (red alarm indication)!
Employing the METPOINT
Observe measuring range of the sensor unit! ≤ 0.01...5.0 mg/m³ (in accordance with ISO 8573-1)
IMPORTANT!
Overheating!
Overheating will destroy the sensor unit and the evaluation unit.
Observe the permissible storage and transport temperature, as well as the permissible operating temperature
(e.g. protect the measuring device against direct sunlight).
METPOINT ® OCV
®
OCV must neither be set up in insufficiently ventilated rooms nor near heat sources or
®
OCV above the indicated measuring range can damage the device!
®
®
OCV device (manual, operating instructions, manufacturer's
Safety instructions
OCV should not be exposed to vibrations
®
OCV and the connecting lines.
9