Selecting Units For Consumption, Flow, Temperature And Pressure - Beko METPOINT Installation And Operating Manual

Installation and operating manual
6.3.3. Selecting units for consumption, flow, temperature and pressure
Setup → Sensor Setup → Units
Press the >>UP<< button to select the desired unit and confirm by pressing the >>ENTER<< button 2x.
30
To change the unit, press the >>UP<< button to select the "Unit"
field and confirm by pressing the >>ENTER<< button.
If there are more possible units that fit on the screen, press the
"<<" button to call up the next screen.
EN
METPOINT SF53
®