MIXVIBES CROSS DJ User Manual page 71

Loading Tracks with U-MIX CONTROL PRO/U-MIX CONTROL 2
perform the following steps to select and load a track with the controller:
1 use the Browse encoder to scroll through your collection. or hold the Shift
button and turn the Browse encoder to scroll by 10 tracks through your
collection.
press Load A to load the selected track into player a, or press Load B to
2
load it into player B.
If you use a different controller than u-mIX control pro/2, it will most likely
have Browse and load controls as standard. please have a look at the manual of
your controller or at the PDF file documenting the MIDI preset of your controller
(see page 30 for more information)
Loading Tracks with the Mouse
perform one of the following actions to select and load a track:
•
Drag and drop a track from any of the tracklist types onto one of the players.
•
Drag and drop a track from any of the tracklist types onto one of the waveforms
in the beat matcher to load the track into the corresponding player.
•
right-click (ctrl-click on mac) the track and select Load in Player/A, or Load
in Player/B or Load in Player/Active.
NOTE the active player is the player where you can see the yellow (player
a) or red (player B) bar at the very top of the player above the track title in the
user interface. you can select which player is currently active by clicking an
empty space on the player or by pressing the (ÿ) key.
Loading Tracks with the Keyboard
perform the following steps to select and load a track:
1 Hold (Ctrl) (Windows) or (cmd) (mac) and press (¼) and (½) to scroll
through your collection and to select the track you wish to load.
2 Hold (Ctrl)+(ª) (Windows) or (ald)+(cmd) (mac). then press (æ) to load
the track into player a or press (Æ) to load the track into player B.
NOTE By default croSS DJ/croSS DJ le loads the track completely into
the memory of your computer for quick access, which puts some load on the
CPU. The amount of memory that may be used by CROSS DJ can be config-
ured with the Audio Cache slider in Preferences/General. In most cases you
will not need to change the default setting. If you prefer your tracks to be
streamed directly from the audio files, set the Audio Cache slider to 0%.
Importing and Mixing your Music
71