MIXVIBES CROSS DJ User Manual page 66

4 Select one of the following options depending on what croSS is to analyze:
•
Analyze all
to the collection. During the analysis croSS will do a gain analysis to
check, whether the signal strength needs to be raised or lowered when
the track is played. furthermore, a peak analysis is done and the infor-
mation collected is used to display the waveform of the audio in the HuD
and in the full track display on the player. then, the Bpm of the track is
detected and croSS sets the beatgrid for the track. the beatgrid will
help you to perform different kinds of beat sync operations (more to be
found below).
•
Analyze Beatgrid/BPM only
the beatgrid and the Bpm of the track only. this option is very useful if
you updated from croSS version 1.6 or lower to version 1.7 and higher.
In general the gain and peaks of the tracks in your collection are already
analyzed. to make use of the new sync features in version 1.7 you only
need to perform a beatgrid/Bpm analysis.
•
Analyze Gain only use this option to analyze the gain of the track only,
in case you have changed the gain value of a track and want to restore it
to the default, automatically analyzed value.
•
Analyze Peak only use this option to only analyze the peaks of the
track. this is useful when you do not need the beatgrid or gain informa-
tion, maybe because you use timecode.
A
Have a look at column A. (short for analysis Status) and the column with the
icons, the Status column to see which tracks have been analysed (a check
mark in column A.) or not. In the image above the fifth track is currently
being analysed and 67% of the analysis is done.
use this option to analyze tracks that are added newly
use this option to make croSS analyze
Importing and Mixing your Music
66