MIXVIBES CROSS DJ User Manual page 31

If you use croSS DJ with u-mIX control pro or u-mIX control 2 make sure
that the controller is connected before you launch the application. During start-up
croSS DJ will detect the controller and its mIDI preset is activated automatically.
croSS DJ le automatically checks if the bundled controller is connected. If the
bundled controller cannot be found, croSS DJ le cannot be launched. otherwise
croSS DJ le will automatically activate the mapping for the controller.
If you use any other controller, please connect it to your computer before launch-
ing croSS DJ. once you see the main window perform the following steps to as-
sign the mIDI port of your controller to one of the mIDI presets:
open the File menu and click Preferences. click MIDI to open the MIDI tab.
1
for each mIDI port/controller croSS DJ could detect, you will see a tab
with the controller name/port name at the top of the panel.
2 click the tab with the controller name/port name, for which you wish to as-
sign a mIDI preset.
3 Scroll through the list Controller and click the mIDI preset you wish to as-
sign. the following image shows an example with one detected controller
(here mixVibes u-mIX control pro). this controller is assigned to the
mIDI preset with the same name.
4 repeat steps 2 and 3 if you wish to use more than one controller.
Connect and Configure your Hardware
31