MIXVIBES CROSS DJ User Manual page 120

3 press and hold the buttons SHIFT and BASS_B on the controller.
Switch the controller on while pressing the buttons SHIFT and BASS_B.
4
5
The firmware version (X.Y.) is encoded into the LEDs. The LEDs for player A
show the major version number (X), the leDs for player B the minor version
number (y).
•
X (on player a): 1 (pItcH moDe), 2 (Select), 3 (locator1), 4 (loca-
tor2), 5 (locator3), 6 (VInyl), 7 (BenD-), 8 (BenD+), 9 (Sync)
•
y (on player B): 1 (pItcH moDe), 2 (Select), 3 (locator1), 4 (loca-
tor2), 5 (locator3), 6 (VInyl), 7 (BenD-), 8 (BenD+), 9 (Sync)
press SHIFT to return to normal mode.
6
How can I upgrade the firmware of my controller?
1 make sure your controller is connected via uSB to the computer.
2
power the device off.
3 press and hold the buttons SHIFT and BROWSE on the controller.
Switch the controller on while pressing the buttons SHIFT and BROWSE.
4
5 release the buttons SHIFT and BROWSE. the buttons Source A and Source
B should light up now.
6
a new drive named "midiupgDisk" should be found on your system.
7 Drag and drop the firmware file onto the "midiUpgDisk" drive. Make sure
that you use the correct firmware file for your controller.
•
The firmware files for U-MIX CONTROL PRO use the following naming
pattern: u-mIX_pro_*V*.bin
•
The firmware files for U-MIX CONTROL 2 use the following naming
pattern: u-mIX_2_*V*.bin
8
Once the firmware file is dropped the upgrade process begins. LEDs on the
controller inform you about the update progress:
•
Update Data 30% = KILL BASS A/B are flashing
•
Update Data 60% = KILL MID A/B are flashing
•
Update Data 90% = KILL TREB A/B are flashing
•
Update Success = LOAD A/B are flashing
•
update error = loaD a/B are off
9 After the firmware is updated, the LEDs will turn off.
Troubleshooting and FAQ
120