MIXVIBES CROSS DJ User Manual page 108

•
the feedback value starts at about 50% and increases to about 80%, if you turn
the amount knob clockwise. With a higher feedback value the sound of the Jet
becomes more metallic.
•
the Jet effect uses a low frequency oscillator that creates a sinus waveform to
modulate/modify the audio signal. the speed of the lfo is not Bpm dependent
and its range goes from 0.1 Hz to 5 Hz.
Transform
transform is a tremolo-style effect: it repetitively changes the amplitude (level)
of the player's audio signal. the change of the amplitude sounds as if the audio
needs to pass a gate, those doors are rhythmically opened and closed. the depth
parameter of the effect is always 100%.
you can change the following effect parameters with the amount knob:
•
The LFO uses a square waveform in the first 50% of the Amount knob; in the
second 50% a sine waveform is used.
•
the amplitude change is beat-synced to the tempo of the currently playing
track. the rate is 2 beats when the knob is between 0 and 25; it is 1 beat be-
tween 25 and 50; it is 1/2 beat between 50 and 80; and finally 1/4 beats between
80 and 100. the shorter the chosen rate, the more often the level changes.
Chopper
The Chopper effect is an auto filter that allows you to control the LFO rate and the
frequency ranges of the filter all with one knob. The Chopper effect uses a sine
waveform to control the lfo. the following parameters are controlled with the fX
amount knob:
•
the depth can be set in a range from 0 to 100%.
•
the lfo rate can be set to a tempo between 0,76 Hz to 24 Hz.
•
The low minimum frequency that is filtered can be set between 781 to 569 Hz.
•
The low maximum frequency that is filtered can be set between 1480 to 2680
Hz.
•
The high minimum frequency that is filtered can be set between 231 to 569 Hz.
•
The high maximum frequency is fixed at 11900 Hz.
Crush
crush is a distortion effect; changing the sample rate and the bit depth of the origi-
nal audio signal creates the distortion. the fX amount knob can control the fol-
lowing parameters:
Advanced Features
108