Pylontech UP5000 Product Presentation page 32

Configuration-Victron
1. When connected to the
battery, the color control
can automatically identify
"Pylontech"
5. Choose suitable
operation "mode"
Page 32
2. Go to settings,
open "DVCC"
6. If you choose
"Optimized", please set
minimum SOC at 10%
or 5%.
3. Switch on "DVCC"
8. The host computer (VE
configure) settings can be
referred at
https://www.victronenergy.com
/live/battery_compatibility:pylo
ntech_phantom
7. Connect inverter
to host computer
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
4. Go to settings, open "ESS"
Victron website: