Embroidering; Embroidering A Pattern - Brother Computerized Embroidery Sewing Machine Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Embroidering

After the preparations are done, you can try embroidering. An example of the steps for an embroidery
pattern will be given here.

Embroidering a pattern

Embroidery patterns are embroidered with a change
of thread after each color.
a Prepare embroidery thread of the color shown
on the LCD.
1
2
4
a Embroidery foot "Q" (recommended presser foot)
b Current color step/Number of colors in design
c Current name of color
d Current color part
e Next color part
• Typical color names, embroidery thread/
country thread color number, needle count ,
and time to sew (after
displayed on the LCD. When switching the
display, press
it. Refer to "LCD (liquid crystal display)
operation" (page 129).
134
3
5
is pressed) can be
(Settings key) to change
Example: Embroidery thread number selected
b Set the embroidery thread in the thread
cassette, and thread the needle.
• Refer to "Loading the spool into the thread
cassette" (page 22) and "Threading the
needle" (page 25).
c Pass the thread through the embroidery foot
hole, and hold it gently in your left hand.
Give the thread a little slack.
CAUTION
● If the thread is pulled too tight, the needle
may break or bend.
● Do not let hands or objects hit the
carriage while sewing. The pattern may
misalign.