Changing The Machine Settings - Brother Computerized Embroidery Sewing Machine Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Changing the Machine Settings

Various sewing machine operations and sewing settings can be changed.
The stitch or machine attributes that can be set are listed below.
Attribute
Thread color/
needle count
Needle
position
Twin needle
sewing
Thread color
index
Automatic
thread cutting
for embroidery
Stitch width
control
Buzzer
Opening
screen
Language
LCD brightness
a Turn on the sewing machine.
The LCD comes on.
Icon
You can switch among thread color/thread
number/needle count when embroidering.
Specifies where the needle is positioned
when the sewing machine is stopped.
Specifies the twin needle.
When embroidery data containing custom
thread colors specified with the PE-DESIGN
Ver.5.0 is saved on a blank card, the stored
custom thread colors are displayed on the
machine, if "ON" is selected for this setting.
Press this key to use the automatic thread
cutting function when embroidering.
Allows the stitch width to be adjusted with
the sewing speed controller.
Specifies whether or not a beep is sounded
with each operation (page 156).
Sets whether or not to display the opening
screen when the power is turned on.
(There are models where this cannot be
changed.)
Allows the language used in the screens to
be changed.
Adjusts the brightness of the LCD.
Details
b Press
The settings screen appears.
LCD (liquid crystal display) operation 13
Settings
Thread color/Embroidery thread
number/Country Embroidery thread
number/Needle count/Time to
Embroider (after is pressed)
Down Up
Normal needle Twin needle
English, French, German, Dutch,
Spanish, Italian, Danish,
Norwegian, Finnish, Swedish,
Portuguese, Russian, Japanese,
Korean or others
Lighter Darker
(Settings key) on the display panel.
1