Attaching The Embroidery Foot - Brother Computerized Embroidery Sewing Machine Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Attaching the embroidery foot

Attachment of the embroidery foot is explained here.

Attaching the embroidery foot

Attach the embroidery foot when embroidering.
Have the included embroidery foot "Q" and a
screwdriver ready.
a Embroidery foot bar
b Caught by the presser foot holder
CAUTION
● Always use the embroidery foot "Q" when
embroidering. If the wrong presser foot is
used, the needle may hit the presser foot
and break or bend.
a Press
twice to raise the needle.
a The needle goes up.
b Turn off the sewing machine.
1
2
(Needle position button) once or
1
CAUTION
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if the start/stop button
is accidentary pressed and the machine
starts sewing.
c Raise the presser foot lever.
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d Press and hold the black button on the back of
the presser foot holder to release it.
1
2
a Black button
b Presser foot holder
Detach the presser foot from the presser foot
holder.
Attaching the embroidery foot 115
1
4