Brother Computerized Embroidery Sewing Machine Operation Manual page 101

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
CAUTION
● Be sure to securely tighten the screws
with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.
● Before starting to sew, slowly turn the
balance wheel toward you and check that
the needle does not touch the presser
foot. If the needle hits the presser foot,
the needle may bend or break.
e Select a stitch.
• For details, refer to "Selecting stitching" (page
45).
f Place one hand on each side of the presser
foot, and then evenly guide the fabric while
sewing.
Note
When sewing with the walking foot, sew at a
speed between slow and medium.
When quilting, use a 90/14 home sewing
machine needle.
■ Using the optional quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
Insert the stem of the quilter into the hole at
a
the rear of the walking foot or presser foot
holder.
Walking foot
Presser foot holder
Adjust the stem of the quilter so that the quilt
b
guide aligns with the seam that has already
been sewn.
Appliqué, Patchwork and Quilt Stitching 95
3