Removing The Embroidery Unit - Brother Computerized Embroidery Sewing Machine Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
CAUTION
● Do not put your hands or anything else
near the carriage. It could cause injury.
Note
If the initial settings are made with hands or
objects near the carriage, the LCD may
return to the initial display. In such a case,
turn the power on again after removing
whatever is near the carriage.
The screen for selecting the embroidery
pattern group is displayed.
• For details on Embroidery patterns, refer to
"Selecting embroidery patterns" (page 128).
Memo
Utility stitches cannot be selected when the
embroidery unit is attached.
120

Removing the embroidery unit

After removing the embroidery frame, turn off the
machine and remove the embroidery unit.
a Be sure that the sewing machine is stopped.
b Remove the embroidery frame.
• For details on removing the embroidery
frame, refer to "Removing the embroidery
frame" (page 127).
Press on the LCD.
c
The embroidery carriage moves into a
position where it can be stored.
d Turn off the sewing machine.
CAUTION
● Always turn off the sewing machine
before removing the embroidery unit.
It could cause malfunctions if removed
when the machine was turned on.