Disassembling The Main Unit - EDAN F9 Service Manual

F9 Fetal & maternal Monitor Service Manual
5) Remove the old fuse. Take out a new fuse supplied by EDAN or of the same specification:
Size: Ф5mm*20mm; Model: T1.6AL 250V.
6) Place the new fuse in the fuse socket. Press it in and screw it clockwise back in position.

10.3 Disassembling the Main Unit

The main unit consists of two major parts: upper assembly and lower assembly.
To disassemble the main unit,
1) Fold the LCD display completely flat.
2) Carefully place the monitor upside down on a flat surface covered with cloth or other
protecting pad.
3) With a cross-head screw driver, remove the six screws securing the upper assembly to the
- 47 -
Disassembling the Monitor
Upper
assembly
Lower assembly
Screws