Maintaining The Print Head; Flowchart Of Print Head Maintenance - Canon MultiPASS MP360 User Manual

Maintaining The Print Head

You can print a nozzle check pattern to check whether each print head is operating properly, and
then clean or align the print head.

Flowchart Of Print Head Maintenance

Print the nozzle check pattern.
This pattern enables you to check whether the ink is ejecting from the print head nozzles correctly and
whether the print head is aligned. For instructions on printing and reading the nozzle check pattern, see
page 83 and page 84.
If the nozzle check patterns
are not printed correctly,
Step 2
Perform normal print head cleaning.
(See page 85)
If there is no improvement,
Step 3
Perform deep print head cleaning.
(See page 85)
If there is no improvement,
Step 4
Replace the ink tanks. (See page 78)
If there is no improvement,
The print head may be damaged. Contact the
Canon Customer Care Center.
82
Maintenance
Step 1
If the print head position patterns
Align the print head. (See page 86)
If there is no improvement,
Replace the ink tanks. (See page 78)
If there is no improvement,
are not uniform,
Step 2
Step 3
Chapter 10