Canon MultiPASS MP360 User Manual page 35

Follow this procedure:
1
Load the document on the platen glass.
2
Press [COPY].
3
Use [ ] or [ ] to select the number of copies (max. 99 copies).
NOTE
• For the number of sheets of paper you can load at a time in the multi-purpose tray, see page 15.
4
Adjust the settings for your document as necessary.
NOTE
• To select the paper size and type, see page 25.
• The scanning resolution is fixed to <FINE(PHOTO)>. You cannot change this setting.
• To select the scanning exposure, see page 28.
• To select the copy ratio, see page 28.
5
Press [Menu] repeatedly until <5.SPECIAL COPY> appears.
5.SPECIAL COPY
6
Use [ ] or [ ] to select <BORDERLESS COPY>.
5.SPECIAL COPY
BORDERLESS COPY
7
Press [Set].
100%+ LTR
BORDERLESS COPY
• If a paper type setting is selected that cannot be used in borderless copying, the LCD displays
the following message.
Ex:
SIZE : <
TYPE :
• Press [Set] to confirm the paper size.
• Use [ ] or [ ] to select <GLOSSY>, <HIGH RES.>, <PHOTO PRO>, <PHOTO PLUS>, or
<OTHER> as the paper type, then press [Set].
8
Press [Color].
NOTE
• Pressing [Black] does not start copying.
• You can select the amount of image that extends off the paper. (See page 42)
Chapter 4
2 on 1
FINE
0 1
*LTR >
*PHOTO PRO
33
Copying