Canon MultiPASS MP360 User Manual page 125

Maintenance
Do not service the machine yourself except as specifically described in this guide. If further
servicing is required, contact the Canon Customer Care Center at 757-413-2848.
When storing the machine, choose a location where the machine is not exposed to dust. Dust
accumulation may prevent the machine from operating properly.
Use a damp cloth to clean the machine. Never use flammable solvents such as alcohol, benzene
or thinners. If flammable solvents come in contact with electrical components inside the machine,
it could cause a fire or electrical shock.
Always turn OFF the power and unplug the machine from the power outlet before cleaning the
machine.
If you accidentally switch the machine ON while cleaning it, it may result in injury or damage the
machine.
Handling
Do not attempt to disassemble or modify the machine. There are no user serviceable parts inside
the machine.
The machine contains high-voltage components. Never attempt any maintenance procedure not
described in this guide. Incorrect maintenance procedures may damage the machine, or cause a
fire or electrical shock.
Do not drop paper clips, staples, or other metal objects inside the machine. Also do not spill water,
liquid, or flammable substances inside the machine. If these items come into contact with
high-voltage parts inside the machine, it may result in fire or electrical shock. If these items are
dropped or spilled in the machine, turn OFF the power and unplug the power cord immediately
with dry hands. Then contact the Canon Customer Care Center at 757-413-2848.
Do not use flammable sprays near the machine.
This could cause a fire or electrical shock if the spray comes into contact with electrical
components inside the machine.
There are high-voltage components inside the machine. If you are looking inside the machine to
clear paper jams etc., do not allow metal objects such as jewelry to come into contact with the
inside of the machine. Contact may result in burns or electrical shock.
Others
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
When setting the machine near electric products with fluorescent lighting, separate the machine
at least 5 7/8 inches (15 cm) from electric products equipped with fluorescent lighting. If you place
it near to them, the machine may malfunction as a result of the noise emitted by the fluorescent
lighting.
When turning the power OFF, be sure to press [ON/OFF] and confirm that the [Alarm] lamp has
shut off. If you pull the power plug out of the wall outlet while the [Alarm] lamp is lit or flashing,
the print head is not protected, and you may not be able to print later.
Chapter 12
123
Appendix