Copying Two Pages To Fit Onto A Single Page - Canon MultiPASS MP360 User Manual

Copying Two Pages To Fit Onto A Single Page

This feature enables you to copy two documents onto a single sheet of paper, by reducing and
rotating each image 90 degrees.
NOTE
• If <MEMORY FULL> appears on the LCD when copying, set the image quality to <NORMAL> and try
copying again. (See page 27)
• You can use this feature only when the paper size is set to <LTR> or <A4>. (See page 25)
Follow this procedure:
1
Load the first document on the platen glass.
2
Press [COPY].
3
Use [ ] or [ ] to select the number of copies (max. 99 copies).
NOTE
• For the number of sheets of paper you can load at a time in the multi-purpose tray, see page 15.
4
Adjust the settings for your document as necessary.
NOTE
• To select the paper size and type, see page 25.
• To select the image quality, see page 27.
• To select the scanning exposure, see page 28.
• You cannot select the copy ratio.
5
Press [Menu] repeatedly until <5.SPECIAL COPY> appears.
5.SPECIAL COPY
6
Press [Set].
Ex:
62%
2 on 1
Chapter 4
2 on 1
LTR NORMAL
0 1
31
Copying