Borderless Copying - Canon MultiPASS MP360 User Manual

• If a paper size setting other than <LTR> or <A4> is selected, the LCD displays the following
message.
Ex:
SIZE : <
TYPE :
• Use [ ] or [ ] to select either <LTR> or <A4>, then press [Set].
• Use [ ] or [ ] to select the paper type, then press [Set].
7
Press [Color] for color copying, or [Black] for black & white copying.
SCANNING
8
Load the second document on the platen glass.
NEXT PAGE
END SCANNING:SET
• If you have only one document to scan, press [Set].
9
Press [Color] for color copying, or [Black] for black & white copying.
• Press the same key you pressed in step 7.
IMPORTANT
• If you do not press the same key you pressed in step 7, the machine does not start copying.
NOTE
• To cancel copying, press [Stop/Reset].
• To continue to copy two pages on a single page, repeat steps 7 to 9.

Borderless Copying

This feature enables you to copy color images so that they fill the entire page without borders.
NOTE
• You can use this feature only when the paper type is set to <GLOSSY>, <HIGH RES.>, <PHOTO PRO>,
<PHOTO PLUS>, or <OTHER>. For details on setting the paper type, see page 25.
• You can only copy in color with this feature.
• The copied image may need to be enlarged to fit onto the selected paper size when making borderless copies.
Some cropping may occur.
• When borderless copying is selected, the LCD will display the setting with the symbol "+," such as <95%+>,
<100%+>, etc.
32
Copying
*LTR >
*PLAIN
0 1
:START
Chapter 4