Maintaining The Print Head; Flowchart Of Print Head Maintenance - Canon MP360 User Manual

Maintaining the print head

You can print a nozzle check pattern to check whether each print head is operating properly, and
then clean or align the print head.

Flowchart of print head maintenance

Print the nozzle check pattern.
This pattern enables you to check whether the ink is ejecting from the print head nozzles correctly and whether the
print head is aligned. For instructions on printing and reading the nozzle check pattern, see page 105 and page 106.
If the nozzle check patterns are not printed
Step 2
Perform normal print head cleaning.
(See page 107.)
If there is no improvement,
Step 3
Perform deep print head cleaning.
(See page 107.)
If there is no improvement,
Step 4
Replace the ink tanks. (See page 98.)
If there is no improvement,
The print head may be damaged. Contact your local
authorised Canon dealer or the Canon help line.
Chapter 10
correctly,
Step 1
If the print head position patterns are not
Align the print head. (See page 108.)
If there is no improvement,
Replace the ink tanks. (See page 98.)
uniform,
Step 2
Step 3
If there is no improvement,
Maintenance
104