Telephone Problems - Canon MultiPASS F60 Comprehensive Manual

M C 2. Is the recipient's fax machine ECM-compatible?
If the recipient's fax machine is not ECM-compatible, the fax will be sent in standard mode without
error correction.
Repeated errors occur when you send a fax.
1. Reduce the transmission start speed (
M C
If there is a bad line or connection, transmission may be canceled.

Telephone problems

See below if you have problems using the telephone.
Cannot dial.
1. Is there anything displayed in the LCD?
If nothing is displayed, see p. 12-14.
2. Is the Alarm light blinking?
If it is blinking, see p. 12-17.
3. Is the power strip correctly connected?
Check that the power strip is correctly connected.
4. Did you set the correct telephone line type?
Make sure the machine is set for the correct telephone line type (
Telephone disconnects during a call.
This will happen if the power cord is not connected securely to the machine and wall outlet.
Check that the power cord is securely inserted into the machine and wall outlet, and that the power is
on ( Setup Sheet).
If the machine is connected to a table tap, OA tap or extension cord, make sure they are connected
correctly and, if there is a power switch, that it is on.
Chapter 12
<TX START SPEED>, p. 13-4).
Basic Guide).
Troubleshooting
12-13