Maintaining The Printhead; Flowchart Of Printhead Maintenance - Canon MultiPASS F60 Comprehensive Manual
Canon multipass f60: supplementary guide
Hide thumbs
Also See for MultiPASS F60:
- Software user's manual (206 pages) ,
- Basic manual (115 pages) ,
- Setup sheet (9 pages)
Table of Contents
Advertisement
Maintaining the printhead
After you have printed the nozzle check pattern and checked the state of the nozzle, clean
the printhead and align it.
NOTE
• Before doing the following, open the scanning unit, press "PUSH" on the ink tanks and check that they
are securely inserted. Check how much ink is left and if there is none, replace the ink tank (
Flowchart of printhead maintenance
Print the nozzle check pattern (
This pattern allows you to check if the ink is coming out of the printhead nozzles
correctly and if the printhead is aligned.
The ink is not coming out correctly.
Perform normal printhead cleaning
(<HEAD CLEANING> setting) (
If there is no improvement.
Perform deep printhead cleaning (<HEAD
REFRESHING> setting) (
NOTE
• If the problem is still not solved
If you have followed steps 1 to 3 above and there is no improvement, the printhead may be damaged.
Contact the Canon Customer Care Center.
11-6
Maintenance
Step 2
p. 11-7).
Step 3
p. 11-7).
Step 1
p. 11-7).
The printhead is misaligned.
Align the printhead (
p. 11-4).
Step 2
p. 11-8).
Chapter 11
Advertisement
Table of Contents
