Canon MultiPASS F60 Comprehensive Manual page 91

2
Press [Open] q and lift up the scanning
unit w.
• The printhead holder automatically moves to
the center of the machine.
CAUTION
• Do not try to manually move or stop the
printhead holder.
• Do not touch any metal parts.
3
Press on the tab to release the empty
ink tank q, then remove it from its slot w.
CAUTION
• Do not remove the printhead from the
machine.
• If several ink tanks need replacing,
remove and replace each one individually.
IMPORTANT
• Discard the empty ink tank immediately
according to local laws and regulations
for disposal of consumables.
• Handle ink tanks carefully to avoid
staining clothing or the surrounding area.
4
Pull the orange tape in the direction
of the arrow and remove the plastic
wrapper so you can see the air hole A.
Hold the ink tank as shown and
remove the protective cap B.
• To avoid spilling ink, never press on the long
sides of the ink tank C.
• Once you remove the cap B, do not touch
the ink port D.
5
Insert the ink tank into the empty slot
on the printhead. Press down gently on
the ink tank until an audible click is heard.
• Make sure the ink tank is the correct color for
the slot.
6
Close the scanning unit until it locks into place.
Chapter 11
w
q
w
q
B
A
Ink Tank
BCI-3eY
D C
11-5
Maintenance