2: Document Handling; Document Requirements - Canon MultiPASS F60 Comprehensive Manual

Chapter
2
Document handling
Documents requirements
The documents you load on the platen glass or
sending must meet these requirements:
Document
type
Size
(W × L)
Quantity
Thickness
Weight
Problem documents
• Make sure any glue, ink, or correction fluid on the document is completely dry before
loading.
• Remove all fasteners (staples, paper clips, etc.) before loading.
• To prevent jams in the ADF, do not use any of the following:
Fax Model
– Wrinkled or creased paper
– Curled or rolled paper
– Torn paper
– Hole-punched paper
Chapter 2
Platen glass
• Special types of paper
• Photographs
• Book
• Documents that are not
Fax Model
suitable for the ADF.
Max. 8.5 × 14 in. (216 × 356 mm)
Max. 8.5 × 11.7 in.
Fax Model
(216 × 297 mm)
• 1 sheet
• 10 photographs for multi-scan
Max. 0.79 in. (20 mm)
—
– Carbon paper or carbon-backed paper
– Coated paper
– Onion skin or thin paper
ADF for copying, scanning, or
Fax Model
ADF
Fax Model
Multipage documents of the same
size, thickness, and weight.
Max. 8.5 × 39 in. (216 mm × 1 m)
Min. 4.13 × 5.83 in. (105 × 148 mm)
• Max. 30 letter- or A4-size sheets
(20 lb. or 75 g/m
• Max. 10 legal-size sheets
(20 lb. or 75 g/m
• 1 sheet for sizes other than these.
0.002 to 0.005 in. (0.06 to 0.13 mm)
13 to 24 lb. (50 to 90 g/m
Document handling
Fax Model
2 paper)
2 )
2 )
2-1