Canon MultiPASS F60 Comprehensive Manual page 23

Photo Paper Pro PR-101
A thick paper with a treated surface that enhances gloss and provides superior color
reproduction. It is ideal for printing high-quality photographs.
Size: Letter, A4, 4 × 6 in. (101.6 × 152.4 mm)
Quantity: 1 sheet, 20 sheets (4 × 6 in./101.6 × 152.4 mm size)
Paper thickness lever position: Left
Drying time: 30 minutes
Use for: Printing from your computer/photo printing/copying
• Load the paper with the glossier side facing up.
• Do not attempt to dry the ink with a hairdryer or by exposing printed sheets to direct
sunlight.
Photo Paper Pro PC-101S
Made from the same stock as Photo Paper Pro PR-101, these cards are intended for printing
images that cover the entire surface of the card, without a white border. This paper is ideal for
printing high quality photographs.
Size: 4 × 6 in. (101.6 × 152.4 mm)
Quantity: 20 sheets
Paper thickness lever position: Left
Drying time: 30 minutes
Use for: Printing from your computer/photo printing/copying
• Load the paper with the glossy side facing up.
High Gloss Photo Film HG-201
A bright white finish film that lends striking visual power to charts, graphs, and photographic
images. It creates a sharper and more vivid color output than is possible with coated paper.
Size: Letter, A4
Quantity: 1 sheet
Paper thickness lever position: Left
Drying time: 2 minutes
Use for: Printing from your computer/copying
• If the film is curled, flatten it by curling it in the opposite direction.
• Load the film with the cut corner at the upper right.
Transparencies CF-102
Produce excellent contrast, sharpness, and color, creating crisp and professional overhead
presentations.
Size: Letter, A4
Quantity: 30 sheets
Paper thickness lever position: Left
Drying time: 15 minutes
Use for: Printing from your computer/copying
• Although you can print on either side of CF-102 transparencies, best results can be obtained
by printing on the side toward which it curls when held by the edge.
• Remove each transparency after it is delivered, being careful not to touch any surfaces.
Do not allow transparencies to stack up in the paper output tray.
• Load one sheet of plain paper as the last sheet in the stack.
Chapter 3 Print media handling
3-3