Canon imageCLASS MF6500 Series Advanced Manual page 106

Advanced Fax
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
Q Is BUSY/NO SIGNAL shown on the ERROR TX
REPORT?
A The fax number you dialed is busy. Try sending the
document later.
A The recipient's machine is not working. Ask the
recipient to check the machine.
Q Did the recipient's machine answer within 35
seconds (after all automatic redialing
attempts)?
A Ask the recipient to check the machine. For an
overseas call, add pauses to the registered
number. (See "Dialing an Overseas Number (With
Pauses)," on p. 1-6.)
Q Is the Processing/Data indicator lit?
A The external phone is busy. Please wait until the
external phone becomes free.
Back
Memory fills up immediately when you try to send.
Q Are you sending with the resolution set to
<SUPER FINE> or <ULTRA FINE>?
A If your document does not contain fine text or
photographs, set the resolution to <STANDARD>.
A If your document contains fine text or photographs,
send it directly rather than using a memory
transmission.
Q Is a document stored in memory, leaving little
memory available?
A Print, send, or delete any documents stored in
memory.
Faxes sent from the machine are spotted or dirty.
Q Is the recipient's machine working properly?
A Check the machine by making a copy. If the copy is
clear, the problem may be in the recipient's
machine. If the copy is spotted or dirty, clean the
scanner components. (See Chapter 11,
"Maintenance," in the Basic Guide.)
TOP
Previous Next
7-7