Canon imageCLASS MF6500 Series Advanced Manual page 35

Advanced Fax
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
NOTE
Paper used to make two-sided copies must conform to the following
specifications:
– Paper size: LGL and LTR (A4 loaded on the multi-purpose tray are
available as well.)
– Paper weight: 18 to 24 lb [64 to 90 g/m
1 to 2-Sided
You can make two-sided copies from one-sided documents.
1.
Set documents.
2.
Press [COPY].
3.
Press [Two-Sided].
4.
Use [ ] or [ ] to select <1 > 2-SIDED>,
then press [OK].
5.
Use [ ] or [ ] to select <BOOK TYPE> or
<CALENDAR TYPE>, then press [OK].
<BOOK TYPE>: The front and back sides of the copy will have
the same top-bottom orientation.
<CALENDAR TYPE>: The front and back sides of the copy will
have opposite top-bottom orientations.
2
]
Back Previous
6.
Press [Start].
To cancel all settings, press [Reset].
NOTE
When you set the document on the platen glass, press [Start] for
each document. When scanning is complete, press [OK].
2 to 2-Sided
You can make two-sided copies from two-sided documents.
1.
Set documents.
2.
Press [COPY].
3.
Press [Two-Sided].
4.
Use [ ] or [ ] to select <2 > 2-SIDED>,
then press [OK].
5.
Use [ ] or [ ] to select <BOOK TYPE> or
<CALENDAR TYPE> (for the documents),
then press [OK].
<BOOK TYPE>: The front and back sides of the document have
the same top-bottom orientation.
<CALENDAR TYPE>: The front and back sides of the document
have opposite top-bottom orientations.
TOP
Next
2-4