Canon imageCLASS MF6500 Series Advanced Manual page 55

Advanced Fax
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
[Subnet] If the computer on which NetSpot
Device Installer runs is connected to
more than one network, select the
subnet that the desired device belongs
to.
[Product Type] Select the product name of your
machine. If the product name of your
machine is not displayed, select
[imageCLASS MF6580/6560].
7.
Specify the TCP/IP protocol.
Back Previous
[Frame Type] Select [Ethernet II].
[IP Address Settings with]
Select the method for setting the IP
address.
[Manual Setting]:
You need to set the IP address manually.
The IP address that you enter in [IP
Address] is assigned to the network
board.
[DHCP]:
The IP address is automatically
obtained via DHCP (a DHCP server
needs to be active on the network).
[IP Address] Enter the IP address assigned to the
network board.
TOP
Next
3-14