Protocol Settings; Settings From The Operation Panel Of The Machine - Canon imageCLASS MF6500 Series Advanced Manual

Advanced Fax
1
Features

Protocol Settings

Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
You can specify the machine's protocol settings on the
computer using any of the following software.
– Machine's operation panel (Additional Functions menu)
– Web browser (Remote UI)
– NetSpot Console (via a web browser) (Canon utility
software)
NOTE
– For more details about NetSpot Console, see online help or the
NetSpot Console readme file.
– To specify the protocol settings using NetSpot Console, you must log
in as Administrator. For instructions on how to use NetSpot Console,
see online help for NetSpot Console.
– If you change the IP address etc. on the web browser (Remote UI),
the change is not reflected in the setting display. When you check on
the machine, you can check by <VIEW IP ADDRESS> in
<NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, or
by printing a USER'S DATA LIST. (See Chapter 13, "Machine Settings,"
in the Basic Guide.)
Back Previous
■
Settings from the Operation Panel of
the Machine
TCP/IP Settings
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Confirm that <TCP/IP SETTINGS> is
displayed, then press [OK].
5.
Use [ ] or [ ] to select <USE LPD>, then
press [OK].
TOP
Next
3-16