Appendix; Advanced Copy 2 - Canon imageCLASS MF6500 Series Advanced Manual

Advanced Fax
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7

Appendix

8
Table of Contents
Index
4.
Confirm that <TCP/IP SETTINGS> is
displayed, then press [OK].
5.
Use [ ] or [ ] to select the allocation
method of the IP address, then press [OK].
<IP ADDRESS AUTO.>: Allocates an IP address to the machine
automatically.
<IP ADDRESS>: Allocates a fixed IP address to the machine.
Skip to step 9.
6.
Use [ ] or [ ] to select <ON>, then press
[OK].
7.
Use [ ] or [ ] to select the desired
protocol (DHCP, BOOTP, or RARP), then
press [OK].
8.
Use [ ] or [ ] to select <ON>, then press
[OK].
Skip to step 14.
Back Previous
9.
Use the numeric keys to enter the IP address
number, then press [OK].
10.
Confirm that <SUBNET MASK> is displayed,
then press [OK].
11.
Use the numeric keys to enter the subnet
mask number, then press [OK].
12.
Confirm that <GATEWAY ADDRESS> is
displayed, then press [OK].
13.
Use the numeric keys to enter the gateway
address number, then press [OK].
14.
Press [Stop] to return to standby mode.
15.
Restart the machine.
TOP
Next
3-11