Device Custom Settings - Canon imageCLASS MF6500 Series Advanced Manual

Advanced Fax
1
Features

Device Custom Settings

Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
The machine's custom settings can be edited with the
Remote UI.
The following procedure shows how to customize the
machine's settings from the Remote UI.
NOTE
You can also access these setting menus from the Operation Panel of
the machine. For details, see Chapter 13, "Machine Settings," in the
Basic Guide.
1. Click [Add.Func.] → select [Common
Settings] from the menu that appears under
[Add.Func.] → click the type of custom
setting that you want to specify.
Back Previous
2. Specify all the necessary fields → click [OK].
The above screen shot shows [Common Settings].
NOTE
If you are changing the Network Settings, the machine must be
restarted to enable the settings. Turn OFF the main power switch
of the machine, wait at least 10 seconds, and turn the power back
ON.
TOP
Next
4-23