Radius Server/Primary Server; Radius Server/Secondary Server; Radius Server/Udp Port; Radius Server/Secret - ADTRAN 1200350L1 User Manual

Chapter 4: Configuration Overview

Radius Server/Primary Server

Write security: 1; Read security: 2
This is the IP address of the first RADIUS server that the Router Op-
tion Module should attempt to communicate with when authenti-
cating a PPP peer.

Radius Server/Secondary Server

Write security: 1; Read security: 2
This is the IP address of the back-up RADIUS server that the Router
Option Module should attempt to communicate with when the pri-
mary server does not respond.

Radius Server/UDP Port

Write security: 1; Read security: 2
This is the UDP port that the Router Option Module should use
when communicating with the RADIUS server. The default is 1645,
which is the commonly used port.

Radius Server/Secret

Write security: 0; Read security: 1
The RADIUS server and Router Option Module share this text
string, which is used by the RADIUS sever to authenticate the Rout-
er Option Module that is the RADIUS client. The factory default is
to not use a secret.

Radius Server/Retry Count

Write security: 1; Read security: 2
This is the number of times the Router Option Module should send
a request packet to the RADIUS server without a response before
giving up.
If the number of attempts to communicate with the primary server
is equal to the retry count, the secondary server (if defined) is tried.
If the secondary server does not respond within the retry count, the
PPP peer (or Telnet session) is not authenticated and is dropped.
The default is 5.
4-20 Router Option Module User Manual 61200350L1-1