Chapter 2: Installation
INSTALLATION
Placement of the Option Module
Figure 2-1 shows the proper placement of the option module. Per-
form the following steps to install the option module.
1. Remove the cover plate from the TSU/TDU unit rear panel.
2. Slide the option module into the rear panel of the TSU/TDU unit
until it is positioned firmly against the front of the unit.
3. Fasten the thumbscrews at both edges of the option module.
TSU/HSU
UNIT
Figure 2-1.
2-2
Cover Plate
Option Module
Installing the Option Module
Router Option Module User Manual
61200350L1-1