Table of Contents
Advertisement
Chapter 7: Utility Menu
Utilities/Ping
Write security: 4; Read security: 5
This option is available under the Test Menu via the Front Panel.
The ping menu is used to send ICMP ping messages to hosts. The
following items are under the this menu:
Ping Menu
Start/Stop
Host Address
Size
No. of Packets
No. of Transmits
No. of Receives
% Loss
Utilities/Telnet Client
Write security: 4; Read security: 5
The Telnet menu can be used to activate the Telnet client function in
the Router Option Module.
Host - IP address or domain name (if DNS is configured) of Telnet
server. By default, the standard TCP server port is used. However,
a nonstandard port can be specified here with the IP address or do-
main name separated by a colon (:).
Activate - Starts Telnet client function. The key combination
Control ] cancels the session.
Utilities/Upgrade Menu
Write security: 2; Read security: 3
The Router Option Module firmware can be upgraded using this
menu.
7-2
Description
Activator to start and cancel a ping test
IP address or domain name (if DNS is config-
ured) of device to receive the ping
Total size of ping to send. Range is 40 (def) to
1500 bytes
Total packets to send every two seconds
Total packets sent (read only)
Total packets received (read only)
Percentage loss based on ping returned from
host (read only)
Router Option Module User Manual
61200350L1-1
Advertisement
Table of Contents
