Table of Contents
Advertisement
Chapter 4: Configuration Overview
DLCI Mapping/Active
Write security: 3, Read security: 5
When this parameter is set to Yes (def), the mapping is used to de-
termine the protocols used. If set to No, the Router Option Module
will ignore the virtual circuit with this DLCI.
DLCI Mapping/DLCI
Write security: 3, Read security: 5
This is the DLCI associated with this virtual circuit. This value can
range from 16 to 1007.
DLCI Mapping/IP Map
Write security: 3, Read security: 5
This menu represents the IP protocol mapping that is to take place
for this DLCI.
IP Map/Active
Write security: 3, Read security: 5
When this is set to Yes (def), the Router Option Module will attempt
to transport IP packets for this DLCI. A setting of No means that no
IP traffic or route will be exchanged.
IP Map/IARP
Write security: 3, Read security: 5
When set to Yes (def), the Router Option Module will send Inverse
ARP packets in order to determine the IP address on the other end
of the virtual circuit. If the IARP is responded to, a route is placed
in the IP route table.
When set to No, the route address is to be assigned statically using
the IP Map/Far-End IP Address parameter.
IP Map/Far-End IP Address
Write security: 3, Read security: 5
This is the IP address of the device on the other end of the virtual cir-
cuit. When this DLCI becomes active, the Router Option Module
will add a route in the IP routing table.
IP Map/IP Netmask
Write security: 3, Read security: 5
The IP network mask to apply to the Far-End IP Address and Link
IP Address is specified here.
61200350L1-1
Router Option Module User Manual
4-29
Advertisement
Table of Contents
