Vitek VT-8245 Manual Instruction page 4

ENGLISH
•
Do not direct hot air into your eyes
or other heat-sensitive parts of your
body.
•
The attachments get hot during
use. Allow them to cool down before
removal.
•
Never insert any foreign objects into
any unit body openings.
•
Never block the air inlets of the hot
air brush, do not place it on a soft
surface (a bed or sofa), where the air
inlets may be blocked. Keep the air
inlets free of lint, dust and hair etc.
•
Clean the unit regularly.
•
Unplug the unit after every usage and
before cleaning.
•
When unplugging the unit, pull the
power plug but not the power cord.
•
For children safety reasons do not
leave polyethylene bags used as
packaging unattended.
ATTENTION! Do not allow children to
play with polyethylene bags or packag-
ing film. Danger of suffocation!
•
Do not allow children to touch the unit
body, the power cord or the power
plug during operation of the unit.
•
Do not leave children unattended to
prevent using the unit as a toy.
•
Close supervision is necessary when
children or disabled persons are near
the operating unit.
•
This unit is not intended for usage by
children. Place the unit out of reach
of children during the operation and
cooling down.
•
The unit is not intended for usage by
physically or mentally disabled per-
sons (including children) or by per-
sons lacking experience or knowl-
edge if they are not under super-
vision of a person who is respon-
sible for their safety or if they are
not instructed by this person on the
usage of the unit.
T-8245_105x148.indd 4
•
Check the power cord and power
plug insulation integrity periodically.
•
If the power cord is damaged, it
should be replaced by the manufac-
turer, a maintenance service or similar
qualified personnel to avoid danger.
•
Do not attempt to repair the unit.
Do not disassemble the unit by your-
self, if any malfunction is detected or
after it was dropped, unplug the unit
and apply to any authorized service
center from the contact address list
given in the warranty certificate and
on the website www.vitek.ru.
•
To avoid damages, transport the unit
in the original package only.
•
Keep the unit in a dry cool place out
of reach of children and disabled
persons.
THE UNIT IS
HOUSEHOLD USE
COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK
SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage
at low temperature keep it for at
least three hours at room tempera-
ture before switching on.
•
Unpack the hot air styler and remove
any stickers that can prevent unit
operation.
•
Unwind the power cord completely.
•
Install one of the attachments (7), (8)
or (9). To do this, insert the attachment
into the installation place (1) and turn
it clockwise. If the attachment is set
properly, you'll hear the lock (2) click.
•
Before switching the unit on, make
sure that your home mains voltage
corresponds to the unit operating
voltage.
4
INTENDED FOR
ONLY, ITS
14.03.2019 15:28:17