Start Ping - ADTRAN 1200130L1 User Manual

Chapter 11. Diagnostics

Start Ping

Results are shown once you start the ping. The Start Ping
command causes the FSU to send ten ping requests to the target
station. At the end of the ten-ping test, the following results are
shown:
Pings Sent
This field shows the number of pings sent (always 10).
Responses
This field shows the number of responses received from the
pinged device.
Min Time
This field shows the shortest round-trip delay of the received
responses. Round-trip delay is counted from the time the ping is
sent until the response is received.
Max Time
This field shows the longest round-trip delay of the received
responses. If a response is not received before the unit times out,
the delay is not calculated in.
Avg Time
This field shows the average response time based on all received
responses.
61200.130L1-1 FSU User Manual 103